End-to-end Color 3D Reproduction of Cultural Heritage Artifacts: Roseninsel Replicas
Eurographics Workshop on Graphics and Cultural Heritage (GCH) <17, 2019, Sarajevo, Bosnia and Herzegovina>
Planning exhibitions of cultural artifacts is always challenging. Artifacts can be very sensitive to the environment and therefore their display can be risky. One way to circumvent this is to build replicas of these artifacts. Here, 3D digitization and reproduction, either physical via 3D printing or virtual, using computer graphics, can be the method of choice. For this use case we present a workflow, from photogrammetric acquisition in challenging environments to representation of the acquired 3D models in different ways, such as online visualization and color 3D printed replicas. This work can also be seen as a first step towards establishing a workflow for full color end-to-end reproduction of artifacts. Our workflow was applied on cultural artifacts found around the “Roseninsel” (Rose Island), an island in Lake Starnberg (Bavaria), in collaboration with the Bavarian State Archaeological Collection in Munich. We demonstrate the results of the end-to-end reproduction workflow leading to virtual replicas (online 3D visualization, virtual and augmented reality) and physical replicas (3D printed objects). In addition, we discuss potential optimizations and briefly present an improved state-of-the-art 3D digitization system for fully autonomous acquisition of geometry and colors of cultural heritage objects.
3D Printing Spatially Varying Color and Translucency
ACM Transactions on Graphics
We present an efficient and scalable pipeline for fabricating full-colored objects with spatially-varying translucency from practical and accessible input data via multi-material 3D printing. Observing that the costs associated with BSSRDF measurement and processing are high, the range of 3D printable BSSRDFs are severely limited, and that the human visual system relies only on simple high-level cues to perceive translucency, we propose a method based on reproducing perceptual translucency cues. The input to our pipeline is an RGBA signal defined on the surface of an object, making our approach accessible and practical for designers. We propose a framework for extending standard color management and profiling to combined color and translucency management using a gamut correspondence strategy we call opaque relative processing. We present an efficient streaming method to compute voxel-level material arrangements, achieving both realistic reproduction of measured translucent materials and artistic effects involving multiple fully or partially transparent geometries.
An Observer-Metamerism Sensitivity Index for Electronic Displays
Journal of the Society for Information Display
The effect of observer metamerism induced by electronic displays depends to a large extent on their primary spectra (red, green, and blue in the most common case). In particular, for narrow-band primary spectra whose peak wavelength lies in the range of high variability of the observer's colormatching function, some observers can experience very large differences between actual surface colors (e.g. in a light booth) and displayed colors if the monitor is optimized for the International Commission on Illumination (CIE) 1931 standard observer. However, because narrow-band light-emitting diodes lead to larger color gamuts, more and more monitors with very narrow band primaries are coming onto the market without manufacturers taking into account the associated problem of observer variations. Being able to measure these variations accurately and efficiently is therefore an important objective. In this paper, we propose a new approach to predict the extent of observer metamerism for a particular multiprimary display. Unlike existing dedicated models, ours does not depend on a reference illuminant and a set of reflectance spectra and is computationally more efficient.
Trichromatic Reflectance Capture Using a Tunable Light Source: Setup, Characterization and Reflectance Estimation
Measuring, Modeling, and Reproducing Material Appearance 2016
Measuring, Modeling, and Reproducing Material Appearance (MMRMA) <2016, San Francisco, CA, USA>
Electronic Imaging, 9
A research project is underway to develop a gonio imager particularly dedicated to sample the Bidirectional Reflectance Distribution Function (BRDF) of materials and material compositions employed and created by multimaterial 3D printers. It comprises an almost colorimetric RGB camera and a spectrally tunable light source. In this paper, we investigate an important part of this system, particularly the approach to estimate reflectances from RGB values acquired under multiple illuminants. We first characterize the system by estimating the spectral sensitivities of the camera. Then, we use the sensitivities, a set of illuminants produced by the tunable light source and the corresponding sensor responses to estimate reflectances. For evaluating this approach, we measure the Neugebauer primary reflectances of a polyjet printer employing highly translucent photo-polymer printing materials colored in cyan, magenta, yellow and white. Spectral and colorimetric deviations to spectroradiometric comparison measurements (average 0.67 CIEDE2000 units / 0.0286 spectral RMS) are within the inter-instrument variability of hand-held spectrophotometers used in graphic arts for prints on paper.
Visual Perception of 3D Printed Translucent Objects
24th Color and Imaging Conference
Color Imaging Conference (CIC) <24, 2016, San Diego, CA, USA>
In order to reproduce translucent objects by 3D printers employing fully transparent (or clear) material, modeling the human visual perception of translucency is crucial. In this preliminary study, a set of 256 texture-less samples was created by mixing white and clear materials using multi-jet 3D printing. The samples differ in both lateral light transport properties and transmittance. Two psychophysical experiments were conducted to reveal the relationship between transmittance and a perceptually uniform scale for translucency. The results show that Stevens' power law describes well this relationship within the optically thin range of samples. Furthermore, the sensitivity to lateral light transport is small compared to transmittance for the texture-less sample set.
Color-Managed 3D-Printing with highly Translucent Printing Materials
Measuring, Modeling, and Reproducing Material Appearance 2015
Measuring, Modeling, and Reproducing Material Appearance (MMRMA) <2, 2015, San Francisco, CA, USA>
Many 3D printing applications require the reproduction of an object's color in addition to its shape. One 3D printing technology, called multi-jetting (or poly-jetting), allows full color 3D reproductions by arranging multiple colored materials (UV curing photo-polymers) on a droplet level in a single object. One property of such printing materials is their high translucency posing new challenges for characterizing such 3D printers to create ICC proles. In this paper, we will first describe the whole color-managed 3D printing workflow and will then focus on measuring the colors of highly translucent printing materials. We will show that measurements made by spectrophotometers used in the graphic arts industry are systematically biased towards lower reflection. We will then propose a trichromatic camera-based approach for measuring such colors. Error rates obtained in comparison with spectroradiometric measurements for the same viewing conditions are within the interinstrument-variability of hand-held spectrophotometers used in graphic arts.